RAM Corsair Vengeance LPX 16GB (2*8GB) DDR4 Bus 2666 MHz (CMK16GX4M2A2666C16R) RED _919KT

· CPU
1. Support for 7thand 6th generation Intel® Core™ i7 processors/ Intel® Core™ i5 processors/Intel® Core™ i3 processors/ Intel®Pentium® processors/Intel® Celeron® processors in the LGA1151 package
2. L3 cache varies with CPU
(Please refer "CPU Support List" for more information.)
· Chipset
1. Intel® B250 Express Chipset
· Memory
1. 4 x DDR4 DIMM sockets supporting up to 64 GB of system memory
2. Dual channel memory architecture
3. Support for DDR4 2400/2133 MHz memory modules
4. Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules (operate in non-ECC mode)
5. Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules
6. Support for Extreme Memory Profile (XMP) memory modules
* To support 2400 MHz or XMP memory, you must install a 7th Generation processor.
(Please refer "Memory Support List" for more information.)
· Onboard Graphics
Integrated Graphics Processor- Intel® HD Graphics support:
1. 1 x D-Sub port, supporting a maximum resolution of 1920x1200@60 Hz
2. 1 x DVI-D port, supporting a maximum resolution of 1920x1200@60 Hz
* The DVI-D port does not support D-Sub connection by adapter.
Maximum shared memory of 1 GB
· Audio
1. Realtek® ALC887 codec
2. High Definition Audio
3. 2/4/5.1/7.1-channel
* To configure 7.1-channel audio, you have to use an HD front panel audio module and enable the multi-channel audio feature through the audio driver.
· LAN
1. Realtek® GbE LAN chip (10/100/1000 Mbit)
· Expansion Slots
1. 1 x PCI Express x16 slot, running at x16
2. 11 x PCI Express x1 slots
(All of the PCI Express slots conform to PCI Express 3.0 standard.)
* When two or more graphics cards are installed, be sure to connect the power cable from the power supply to the PCIE_12V_1 or PCIE_12V_2 connector to provide sufficient current to the system and prevent damage to the devices.
· Storage Interface
Chipset:
1. 6 x SATA 6Gb/s connectors
* Refer to "1-7 Internal Connectors," for the installation notices for the M.2 and SATA connectors.
· USB
Chipset:
1. 6 x USB 3.1 Gen 1 ports (4 ports on the back panel, 2 ports available through the internal USB header)
2. 6 x USB 2.0/1.1 ports (2 ports on the back panel, 4 ports available through the internal USB headers)
· Internal I/O Connectors
1. 1 x 24-pin ATX main power connector
2. 1 x 8-pin ATX 12V power connector
3. 2 x PCIe power connectors
4. 1 x CPU fan header
5. 3 x system fan headers
6. 6 x SATA 6Gb/s connectors
7. 1 x front panel header
8. 1 x front panel audio header
9. 1 x S/PDIF Out header
10. 1 x USB 3.1 Gen 1 header
11. 2 x USB 2.0/1.1 headers
12. 1 x serial port header
13. 1 x Clear CMOS jumper
· Back Panel Connectors
1. 1 x PS/2 keyboard/mouse port
2. 1 x D-Sub port
3. 1 x DVI-D port
4. 4 x USB 3.1 Gen 1 ports
5. 2 x USB 2.0/1.1 ports
6. 1 x RJ-45 port
7. 3 x audio jacks
· I/O Controller
1. iTE® I/O Controller Chip
· H/W Monitoring
1. Voltage detection
2. Temperature detection
3. Fan speed detection
4. Overheating warning
5. Fan fail warning
6. Fan speed control
* Whether the fan speed control function is supported will depend on the cooler you install.
· BIOS
1. 1 x 64 Mbit flash
2. Use of licensed AMI UEFI BIOS
3. PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0
· Unique Features
1. Support for APP Center
* Available applications in APP Center may vary by motherboard model. Supported functions of each application may also vary depending on motherboard specifications.
3D OSD
@BIOS
Ambient LED
AutoGreen
BIOS Setup
Color Temperature
Cloud Station
EasyTune
Fast Boot
Game Boost
ON/OFF Charge
Platform Power Management
Smart Backup
Smart Keyboard
Smart TimeLock
System Information Viewer
USB Blocker
V-Tuner
Support for Q-Flash
Support for Xpress Install
· Bundle Software
1. Norton® Internet Security (OEM version)
2. cFosSpeed
· Operating System
1. Windows® 10 64-bit (for 7th Generation Intel® Processors)
2. Windows® 10 64-bit / Windows® 8.1 64-bit / Windows® 7 32-bit / 64-bits (for 6th Generation Intel® Processors)
* Please download the "Windows USB Installation Tool" from GIGABYTE's website and install it before installing Windows 7.
· Form Factor
1. ATX Form Factor; 30.5cm x 20.0cm
Bảo hành | 12 tháng |
VAT | Đã bao gồm VAT |
· CPU
1. Support for 7thand 6th generation Intel® Core™ i7 processors/ Intel® Core™ i5 processors/Intel® Core™ i3 processors/ Intel®Pentium® processors/Intel® Celeron® processors in the LGA1151 package
2. L3 cache varies with CPU
(Please refer "CPU Support List" for more information.)
· Chipset
1. Intel® B250 Express Chipset
· Memory
1. 4 x DDR4 DIMM sockets supporting up to 64 GB of system memory
2. Dual channel memory architecture
3. Support for DDR4 2400/2133 MHz memory modules
4. Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules (operate in non-ECC mode)
5. Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules
6. Support for Extreme Memory Profile (XMP) memory modules
* To support 2400 MHz or XMP memory, you must install a 7th Generation processor.
(Please refer "Memory Support List" for more information.)
· Onboard Graphics
Integrated Graphics Processor- Intel® HD Graphics support:
1. 1 x D-Sub port, supporting a maximum resolution of 1920x1200@60 Hz
2. 1 x DVI-D port, supporting a maximum resolution of 1920x1200@60 Hz
* The DVI-D port does not support D-Sub connection by adapter.
Maximum shared memory of 1 GB
· Audio
1. Realtek® ALC887 codec
2. High Definition Audio
3. 2/4/5.1/7.1-channel
* To configure 7.1-channel audio, you have to use an HD front panel audio module and enable the multi-channel audio feature through the audio driver.
· LAN
1. Realtek® GbE LAN chip (10/100/1000 Mbit)
· Expansion Slots
1. 1 x PCI Express x16 slot, running at x16
2. 11 x PCI Express x1 slots
(All of the PCI Express slots conform to PCI Express 3.0 standard.)
* When two or more graphics cards are installed, be sure to connect the power cable from the power supply to the PCIE_12V_1 or PCIE_12V_2 connector to provide sufficient current to the system and prevent damage to the devices.
· Storage Interface
Chipset:
1. 6 x SATA 6Gb/s connectors
* Refer to "1-7 Internal Connectors," for the installation notices for the M.2 and SATA connectors.
· USB
Chipset:
1. 6 x USB 3.1 Gen 1 ports (4 ports on the back panel, 2 ports available through the internal USB header)
2. 6 x USB 2.0/1.1 ports (2 ports on the back panel, 4 ports available through the internal USB headers)
· Internal I/O Connectors
1. 1 x 24-pin ATX main power connector
2. 1 x 8-pin ATX 12V power connector
3. 2 x PCIe power connectors
4. 1 x CPU fan header
5. 3 x system fan headers
6. 6 x SATA 6Gb/s connectors
7. 1 x front panel header
8. 1 x front panel audio header
9. 1 x S/PDIF Out header
10. 1 x USB 3.1 Gen 1 header
11. 2 x USB 2.0/1.1 headers
12. 1 x serial port header
13. 1 x Clear CMOS jumper
· Back Panel Connectors
1. 1 x PS/2 keyboard/mouse port
2. 1 x D-Sub port
3. 1 x DVI-D port
4. 4 x USB 3.1 Gen 1 ports
5. 2 x USB 2.0/1.1 ports
6. 1 x RJ-45 port
7. 3 x audio jacks
· I/O Controller
1. iTE® I/O Controller Chip
· H/W Monitoring
1. Voltage detection
2. Temperature detection
3. Fan speed detection
4. Overheating warning
5. Fan fail warning
6. Fan speed control
* Whether the fan speed control function is supported will depend on the cooler you install.
· BIOS
1. 1 x 64 Mbit flash
2. Use of licensed AMI UEFI BIOS
3. PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0
· Unique Features
1. Support for APP Center
* Available applications in APP Center may vary by motherboard model. Supported functions of each application may also vary depending on motherboard specifications.
3D OSD
@BIOS
Ambient LED
AutoGreen
BIOS Setup
Color Temperature
Cloud Station
EasyTune
Fast Boot
Game Boost
ON/OFF Charge
Platform Power Management
Smart Backup
Smart Keyboard
Smart TimeLock
System Information Viewer
USB Blocker
V-Tuner
Support for Q-Flash
Support for Xpress Install
· Bundle Software
1. Norton® Internet Security (OEM version)
2. cFosSpeed
· Operating System
1. Windows® 10 64-bit (for 7th Generation Intel® Processors)
2. Windows® 10 64-bit / Windows® 8.1 64-bit / Windows® 7 32-bit / 64-bits (for 6th Generation Intel® Processors)
* Please download the "Windows USB Installation Tool" from GIGABYTE's website and install it before installing Windows 7.
· Form Factor
1. ATX Form Factor; 30.5cm x 20.0cm
CPU: 11th Gen Intel® Core™ i7-11800H (2.3GHz~4.6GHz)
Memory: 16GB 2x8GB DDR4 Slots (DDR4-3200, Max 64GB)
HDD: 1TB SSD (M.2 SSD, 2 slots Type 2280)
VGA: NVIDIA GeForce RTX 3070 8GB GDDR6 Boost Clock 1560 MHz, Maximum Graphics Power 130 W
Display: 15.6" Thin Bezel FHD 1920x1080 IPS-level Anti-glare Display LCD (300Hz, 72% NTSC)
Weight: 2,20 Kg
CPU: 12th Generation Intel Core i5-1235U (1.3GHz up to 4.4GHz 12MB)
Memory: 8GB DDR4 3200MHz (1x8GB, 2 Slot)
HDD: 512GB PCIe® NVMe™ M.2 SSD
VGA: Intel Iris Xe Graphics
Display: 14 Inch FHD (1920x1080) Anti-glare, 45% NTSC
Weight: 1.7 Kg
CPU: AMD Ryzen™ 7 7735HS Mobile Processor (3.2GHz Up to 4.75 GHz, 8Cores, 16Threads, 16MB Cache)
Memory: 16GB DDr5 Bus 4800Mhz (2 Slot, 8GB x 02, Max 64GB Ram)
HDD: 512GB M.2 NVMe™ PCIe® 4.0 Performance SSD
VGA: NVIDIA® GeForce RTX™ 4060 LapTop GPU 8GB GDDR6 Up to 2250MHz Boost Clock 105W Maximum Graphics Power with Dynamic Boost
Display: 15.6 inch Full HD (1920 x 1080) 144Hz 45% NTSC IPS Level
Weight: 2,20 Kg
CPU: Intel® Core™ Ultra 7 155U (2.10GHz up to 4.80GHz, 12MB Cache)
Memory: 32GB (1x 32GB) SO-DIMM DDR5-5600MHz (2 slots, up to 64GB)
HDD: 1TB SSD M.2 2280 PCIe® 4.0x4 NVMe® Opal 2.0
VGA: Intel® Arc™ Graphics
Display: 14inch WUXGA (1920x1200) IPS 400nits Anti-glare, 45% NTSC, DBEF5
Weight: 1.42 kg
CPU: Intel Core i3-14100, 4C (4P + 0E) / 8T, P-core 3.5 / 4.7GHz, 12MB
Memory: 1x 8GB UDIMM DDR5-4800
HDD: 512GB SSD M.2 2280 PCIe 4.0x4 Performance NVMe Opal 2.0
VGA: Integrated Intel® UHD Graphics 730
Weight: 5.6 kg